Showing posts with label category 6. Show all posts
Showing posts with label category 6. Show all posts

Friday, December 28, 2012

Colocation Data Centers Structured Cabling Trends



As companies look to embrace cloud computing or backup their existing data centers, many are evaluating colocation as an option.  With this increased demand, colocation data centers are popping up all over the world and becoming a larger part of the overall data center market.  In 2013, the colocation sector is expected to account for about 25-percent of the structured-cabling data center market. During the work to develop the structured cabling forecast for the soon to be released Bishop & Associates report, "Structured Cabling Technology and Market Assessment," we had the chance to talk to project managers that are responsible for implementing 10,000 - 20,000 sqft build-outs in colocation facilities. It was clear to us that a few key trends have emerged:

  • Whenever possible contractors recommend the use of pre-terminated copper and fiber cabling.  The benefits of utilizing these components include cost reduction, on-time delivery and the project is easier to manage.
  • Although they are installing MPO cassettes on some jobs the cost premium often scares customers away.
  • More OM3 fiber is being installed than OM4.  The up-sell to OM4 is difficult since OM3 covers the distances that are typically seen in these facilities (300m at 10G).
  • A majority of the copper cabling is being installed is Category 6. 

A typical colocation lease averages about eight years.  Since the clients don't know what their requirements will be in this timeframe, they are less likely to make decisions that "future-proof" the installation for reuse with upgraded active equipment.  Tight budgets further preclude the addition of higher performing cabling products.  They would prefer to re-cable in the future than to pay for it now.  Since many of these installations are based on Top-of-Rack (ToR) architecture, re-cabling is viewed as a much simpler thing to do than to install new equipment when the cabinets are stuffed full of cabling. In view of this, we project that Category 6A and Category 7 cabling will only see very slow growth and that OM3 will be the mainstay over the next few years.

Monday, July 26, 2010

Cost Effective 10G Data Center Networks

For networks running Gigabit Ethernet, it’s a no-brainer to use Category 5e or 6 cabling with low-cost copper switches for less than 100m connections because they are very reliable and cost about 40-percent less per port than short-wavelength optical ones. But for 10G, there are other factors to consider.

While 10GBASE-T ports are now supposedly available on switches (at least the top Ethernet switch vendors, Brocade, Cisco and Extreme Networks say they have them), is it really more cost effective to use these instead of 10GBASE-SR, 10GBASE-CX4 or 10GBASE-CR (SFP+ direct attach copper)? Well, again, it depends on what your network looks like and how well your data center electrical power and cooling structures are designed.

First, 10GBASE-CX4 is really a legacy product and is only available on a limited number of switches so you may want to rule this out right away. If you’re looking for higher density, but you can’t support too many higher power devices, I would opt for 10GBASE-SR because it has the lowest power consumption – usually less than 1W/port. And also, the useful life of LOMF is longer; it’s smaller so won’t take up as much space or block cooling airflow if installed under a raised floor.

If you don’t have a power or density problem and can make do with just a few 10G ports for a short distance, you may choose to use 10GBASE-CR (about $615/port). But, if you don’t have a power or density issue and you need to go longer than about 10m, you’ll still need to use 10GBASE-SR and if you need a reach of more than 300m you’ll need to either install OM4 cable (which will get you up to 600m in some cases) to use with your SR devices; or look at 10GBASE-LR modules ($2500/port) that will cost you about twice as much as the SR transceivers (about $1300/port). If your reach needs to be less than 100m and you can afford higher power, but you need the density, 10GBASE-T (<$500/port) may be your solution. If you have a mix of these requirements, you may want to make sure you opt for an SFP-based switch so you can mix long and short reaches and copper and fiber modules/cables for maximum flexibility.

So what’s the bottom line? Do an assessment of your needs in your data center (and the rest of your network for that matter) and plan them out in order to maximize the cost effectiveness of your 10G networks. One more thing – if you can wait a few months, you may want to consider delaying implementation of 10G until later this year when most of the 10GBASE-T chip manufacturers promise to have less than 2.5W devices commercially available, which will drastically reduce (about half) its per port power consumption.