SC10 and Optical Transcievers

It’s a beautiful time of year in New Orleans for the top supercomputing companies to show their wares. While I wouldn’t consider SC10 exactly the place to sell optical components, there were a few new developments there. SCinet – the network that is always built at the top HPC conference – boasted 100G Ethernet as well as OTu4. Alcatel-Lucent, Ciena, Cisco, Force10 and Juniper, among others donated equipment to build this network. Module vendors Avago Technologies, Finisar and Reflex Photonics contributed QSFP and CFP 40G and 100G devices to the cause.

Meanwhile, the Ethernet alliance was showing two demonstrations in its booth – a converged network running FCoE and RoCE over 40GigE and 100GigE. Nineteen different vendors participated in this demo that was run by the University of New Hampshire Interoperability Lab. Both CFPs and QSFPs were used in this demo.

Some of you may wonder why I would attend SC10. I keep my eye on the HPC market because it usually indicates where the broader data center market will be in a few years. And, in fact, even medium-sized businesses’ data centers with higher computational needs are starting to resemble small HPC centers with their server clusters using top-of-rack switching.

Most of the top optical transceiver vendors and even some of the smaller ones see this market as an opportunity as well. While InfiniBand still uses a lot of copper interconnects, for 40G and 120G, this is changing. QSFP was the standout for 40G IB displays and CXP AOCs were shown for 120G as well. Avago Technologies was the first to announce a CXP module at the show.

Some believe that the CXP will be short-lived because there is progress being made on 4x25 technologies – Luxtera announced its 25G receivers to go with its 25G transmitter that it announced earlier this year. But it will still be a few years before all of the components for 25G will be ready for system’s developers to spec in. Tyco Electronics had a demonstration at their booth showing it is possible to run 28G over eight inches of a PCB, but this was still a prototype. And Xilinx has announced a chip for 28G electrical transceivers that can be used with this board design. But, none of these devices are even being tested by equipment manufacturers yet and the CXP has already been adopted by a few. So I think the CXP may have more life in it than some people may think.

AOCs (Part 3 and last for now)

The last of my summary of AOC Implementations:

Reflex Photonics has gained an early customer base in InfiniBand and PCI Express extender applications with its SNAP 12 products, and is using the existing customer base to increase awareness of InterBoard products for data center customers. In developing InterBoard, Reflex Photonics moved into coarser channel implementations to meet industry AOC standards. The four-channel cables terminate in an array of 850nm VCSELs that use QSFP connectors suitable for both InfiniBand DDR and 40G Ethernet. What is also interesting about Reflex’s InterBoard is that it contains its optical engine technology, LightAble.

Zarlink (now part of Tyco) began its ZLynx product line with a CX4 interconnect, but quickly added QSFP as the module was standardized. Zarlink is unique in anticipating possible customer interest in dissimilar terminations by offering CX4-to-QSFP cables. Zarlink product developers say they will take the same attitude as CXP applications emerge. While most AOCs will use identical termination on both ends of the cable, the company will explore customer demand for hybrid connectors. Before it was acquired by Tyco, Zarlink was working on 40G implementations that were expected to be released this year. No announcements have been made as of yet, though. Tyco had its own QSFP AOC, namely the Paralight. It remains to be seen how Tyco will merge these product lines.

The first implementations of 40G Ethernet have indeed materialized as AOCs, but are expected to transition into actual optical modules as soon as transceiver manufacturers are ready with their products. What is nice for the end user is that if they want to implement 40G today, they can with AOCs and the same ports will then accept optical modules later if needed. InfiniBand AOC products are expected to stay as AOCs and not transition into optical modules, mainly because most of these connections are less than 30m so are easier to pull through pathways and spaces.

According to CIR, the market for AOCs is expected to be about $180 million (a rather small market for so many entrants) this year, most of which will be for data centers. However, by 2013, it is expected to grow to more than $1-billion – a steep climb and one that will need a lot of suppliers if it is actually going to happen.

Optical Engines

I was reviewing some research I recently conducted for the Optical Interconnect report I wrote for CIR and realized that I hadn’t yet “blogged” about what I would consider some exciting new product directions that many optical components suppliers are taking. We’ve been talking about optical integration for many years and some companies, like Infinera, have actually implemented it into their real-world products. But there are more cases of this than ever before and I think we’re on the brink of some true industry breakthroughs using what many have deemed “optical engines.”

Here is a summary of the component companies and their associated optical engine products:

• BinOptics – it uses its InP PICs to build "custom integrated microphotonics solutions" for its customers
• ColorChip – its silicon photonics is at the center of its 40G QSFP modules
• Lightwire – its Opto-electronic Application Specific Integrated Subsystem (OASIS) promises low power and higher density
• MergeOptics/FCI – OptoPack is at the center of its 10G and above transceiver designs
• Reflex Photonics – LightAble is the building block for its transceiver modules
• Santur – DFB/waveguide architecture has promise for not only tunable lasers, but many different optical interconnects

So what’s the big deal? In the past, optical integration was a science project looking for an application. Now, these companies are leveraging their research to create products such as QSFP modules or tunable transceivers that are selling today. So even though you could make these transceivers tiny, they package them in standard form factors in order to develop a revenue stream in hopes that the technology can truly be used for miniature devices in the near future. Pretty smart business plan I think – especially since we’ve already seen a glimpse of the miniaturization products with Avago’s MicroPOD, Intel’s Light Peak and Luxtera’s OptoPhy, which can also be considered optical engines. And, which are supposedly on the cusp of true adoption into active equipment.